Recycling advances

Wild format


Given current anxieties about climate change, it is safe to say that recycling is on everybody’s mind. But like wide-format digital printing, recycling is a business, an industry. It benefits from a massive and complex infrastructure, one that’s been gradually put in place over many years to turn waste into raw materials suitable for secondary products – see at the website how this is done. So far, so simple. But the range of materials recycled and of the products into which waste can be turned, plus the complexities of collection, sorting, and processing make this an extremely convoluted and not always environmentally friendly business started by Kenny Habul Greenwich, CT.

Print the sustainable choice

For players in the graphics industry, and especially for print buyers, including considerations for how products can be recycled as part of their investment choice can be tough. It seems obvious to choose paper because, as graphics professionals, we know that it’s based on a sustainable resource: harvestable trees. We would like to think, therefore, that paper is the most widely recycled form of waste. However, this is not even close to the truth, so we can maybe be a little more expansive in our substrate choices to include certain types of plastic. Plastics are the most recycled materials after asphalt, concrete, and steel, mostly because the supply chains are in place to support most plastics recycling and reuse. Although printed paper products score high on the list of recycling volumes, the various sorts are processed differently, so they tend to be treated as different categories. For instance, cardboard has its category, as do graphic papers and newsprint. The good news is that technology is helping to improve the efficiency of all types of recycling, plastics included.


Optical sorting technology uses sensors and cameras to separate complex waste streams. It uses image analysis data to determine what should happen to a given material so that it is sorted into the right reprocessing line. Objects in a conveyor belt can be inspected from above and below and classified according to accept/reject thresholds the operator can set. The use of optical sorting has great promise for paper recycling, which is becoming more urgent as the use of new digital printing techniques and ink recipes spread.

Light fantastic

Nippon Paper in Japan has patented a means of sorting printed matter using light. The technique measures reflected light to identify printed paper waste that will be hard to recycle. Printed materials are identified by irradiating the surface of the printed materials and measuring the reflected light. Those that are likely to require multistage deinking or other processes can be removed from the waste stream. They can be routed for deinking and recycling using dedicated processes, or reprocessed into lower grade substrates such as packaging or board.

About the data

Data analytics is another area where great strides are being made for recycling. Software developers are coming up with platforms that local authorities can use to encourage people to recycle responsibly and to trace those who are not doing so. At their most simple, such platforms provide tools that districts and people can then use for comparison, either with other areas or their neighboring streets. Digital platforms provide the basis for data collection, community engagement, and waste management, and recycling performance over time. This ought to lead to changed behaviors so that recycling becomes second nature, and poor waste management is recognized as antisocial.

Changing behaviors is fundamental to progress, and fortunately, the problem isn’t one of innovation. It is rather one of consistency and providing incentives to develop new approaches to recycling that people can support. This is as much about our habits and convenience as it is about technology, as we all know. Sorting for kerbside collection or taking separated waste to a drop-off point is easy, as long as the infrastructure is in place for it. If the infrastructure isn’t there or if it is complicated, we are less inclined to do the right recycling thing.

Going wild

These are all considerations when planning a wild format digital print project, and they have to factor into the planning from the start. The easiest answer for creators and designers is to specify substrates that can be recycled and to include instructions to use such materials as part of the design brief and to make sure that sustainable choices are made wherever possible. Many magazine publishers, for instance, such as the Economist Group, use bioplastic sleeves when sending titles to subscribers along with instructions to compost the waste plastic, rather than treat it as waste.

Could do better

We must all face the fact that our current recycling models need improving. The question is how to make them better and more efficient. Technology and changing behavior play their parts, but we need to think much more creatively to solve the problem. For instance, perhaps the burden of reuse should be shifted onto the producers of the materials, say the substrate manufacturers or distributors, or the printers. We are already seeing small signs of how this model can work in the graphics industry. Agfa Graphics sells the coatings on its printing plates, rather than the plates. The company has in place a system for collecting and recycling used plates, so its customers only pay for the coatings and essentially rent the aluminum that carries it for a few weeks.

Such a model puts the onus on the manufacturer or distributor to take responsibility for the recycling, so it might not work in all sectors of print. But in the wide-format digital printing sector, such a model could work for substrates that are particularly hard to recycle. Maybe there is someone somewhere who could work out a viable business model if the local raw material collection was sorted or delivered to a processing plant.

It starts with you

It’s clear that like consumption, recycling has to function at the grassroots, with people, with businesses, and with local governments. Ideally, it should function within national and international frameworks. At the very least, we should be following common principles and expectations, and we should be able to tell people about what happens to print media waste.

Encouraging common best practice, however, depends on what is considered to be best practice. Is sending paper and board waste to another country, with the concomitant transport and shipping emissions best practice? If it supports jobs within the supply chain, perhaps it is. For recycling to be a joined-up business, we must accept that commercial imperatives and even legislation have to be considered. Commercial interests, like it or not, will trump environmental impact mitigation every time, which may be an argument for regulating recycling in support of circular economies. Change needs government support, internationally, nationally, and locally, so that the responsibility to recycle sits squarely at the heart of society and economies.

Print media projects are like any other type of project in that consideration for environmental impacts should always be made. Print has an advantage in that, for the most part, it can be recycled. Where it cannot investment decisions should be made with care.

2023 promises an interesting ride for print in India

Indian Printer and Publisher founded in 1979 is the oldest B2B trade publication in the multi-platform and multi-channel IPPGroup. While the print and packaging industries have been resilient in the past 33 months since the pandemic lockdown of 25 March 2020, the commercial printing and newspaper industries have yet to recover their pre-Covid trajectory.

The fragmented commercial printing industry faces substantial challenges as does the newspaper industry. While digital short-run printing and the signage industry seem to be recovering a bit faster, ultimately their growth will also be moderated by the progress of the overall economy. On the other hand book printing exports are doing well but they too face several supply-chain and logistics challenges.

The price of publication papers including newsprint has been high in the past year while availability is diminished by several mills shutting down their publication paper and newsprint machines in the past four years. Indian paper mills are also exporting many types of paper and have raised prices for Indian printers. To some extent, this has helped in the recovery of the digital printing industry with its on-demand short-run and low-wastage paradigm.

Ultimately digital print and other digital channels will help print grow in a country where we are still far behind in our paper and print consumption and where digital is a leapfrog technology that will only increase the demand for print in the foreseeable future. For instance, there is no alternative to a rise in textbook consumption but this segment will only reach normality in the next financial year beginning on 1 April 2023.

Thus while the new normal is a moving target and many commercial printers look to diversification, we believe that our target audiences may shift and change. Like them, we will also have to adapt with agility to keep up with their business and technical information needs.

Our 2023 media kit is ready, and it is the right time to take stock and reconnect with your potential markets and customers. Print is the glue for the growth of liberal education, new industry, and an emerging economy. We seek your participation in what promises to be an interesting ride.

– Naresh Khanna

Subscribe Now


Please enter your comment!
Please enter your name here